How to Install a Window in Basement Bathroom
Do you have an previous window that requires to be replaced? Now I am heading to clearly show you how I am updating an previous aluminum window and setting up a new double pane vinyl window in our basement bathroom. Thanks to DAP for sponsoring this article, all opinions are ours — see our whole disclosure plan right here.
Our Birch Dwelling is an more mature house, so we have been accomplishing a great deal of updates to modernize the place. From updating the mantel and hearth, to setting up new flooring and a new kitchen area and pantry, to finding rid of the pink bathtub — it is been a several several years of projects but it is coming collectively! (We’ve place in a great deal of function in the lawn, much too!)
This undertaking is in our basement bathroom, which we have been operating on for awhile now. The very last matter we showed you was including the cement board around the bathroom for the new tile.
Prior to we get much too considerably more into the bathroom remodel, it was a superior time to exchange the previous aluminum window with a new double pane vinyl window. The previous window was installed in the 50’s and is not pretty strength productive.
Luckily, our window isn’t about the vainness/sink location like this 1 — but this sliding mirror was a clever resolution if we did have that difficulty!
Setting up a Window in a Basement Rest room
What is the price to exchange an previous window?
$120 for the new vinyl Jeldwen window and DAP supplies to make it weather limited.
How considerably time does it consider?
It took us about 3 hours from get started to complete together with
- eliminating the previous aluminum window
- cleansing the window place
- setting up the new window
- caulking to make the window weather limited
How to evaluate the for the new window
Evaluate the height and vast on the outdoors and subtract one/4″ to an one/2″. That will give you the remaining proportions of the window.
For this new bathroom window, I ordered a vinyl window devoid of fins on the sides because I was including wood trim around it. It took about a 7 days or more to decide up the window, because it was a custom order.
Get our tips for buying new home windows right here.
What You will Require: Changing an Old Window in a Basement Rest room
This article incorporates affiliate links. Understand more and go through our whole disclosure policy here.
How to Eliminate an Old Window and Set up a New Window
one. Eliminate previous existing window.
I had to slice out the body with a metallic reciprocating observed blade. Soon after producing the cuts, I used the hammer to pry it all out.
If you have an previous wood window and can get rid of it in 1 piece, right here are some suggestions for what to do with previous home windows.
two. Clean up and prep the window location cost-free from dust and debris.
Eliminate any dirt, dust and previous caulk from the previous window.
3. Dry healthy new window.
I created positive that the window I ordered healthy in the place. Phew! Evaluate 2 times, order as soon as!
four. Increase wood trim.
Mainly because this window is in the basement concrete wall, I extra redwood trim. We like operating with redwood because it is a durable wood that’s normally rot- and weather-resistant — we use it in virtually all our out of doors projects, from our deck to our new lifted garden bins. (See redwood concrete bench, garden arbor, and pergola, much too.)
I glued a redwood body in put with DAP DynoGrip. I essential a thing to simply to drill into to hold the window in put.
four. Level the window.
I used a smaller level to make positive it was level in the opening. I was blessed, because the wood body that I created was just right and I did not require to use shims to level it.
6. Take a look at window to make positive it opens simply.
Make positive you slide the window open up and shut to examine that it operates following it is level.
seven. Screw the new window to the wood body.
I used one one/2″ screws to attach the vinyl window to the wood body. Just make positive the screw head is a flat head that doesn’t get in the way of the window opening and closing.
Then I coated the screw heads with the caps that occur with the window. It seems pleasant and helps make the window observe less complicated to hold clean, much too.
6. Seal with foam.
I used DAP Touch ‘N Foam to close all the gaps of the window equally on the inside and outdoors.
seven. Seal with Caulk
Soon after the foam dried I used DAP Window Trim Caulk to seal off the outdoors of the window to hold the h2o out.
Related Looking at: How to Set up Craftsman Window Trim
Now I require to get started operating on the tile to complete off this bathroom! We’re nevertheless deciding on the finishes for this bathroom — we could do some entertaining moroccan model fish scale tile like this, or some present day hexagon tile… heaps of alternatives!
Stay tuned for more bathroom remodel to occur — and you can see in which this bathroom commenced right here and how we installed the cement board right here.
Much more Do it yourself window updates: